Role of continuous phase protein on the oxidative stability of fish oil-in-water emulsions

Whey protein isolate (WPI), soy protein isolate (SPI), and sodium caseinate (CAS) can inhibit lipid oxidation when they produce a positive charge at the interface of emulsion droplets. However, when proteins are used to stabilize oil-in-water emulsions, only a fraction of them actually absorb to the emulsion droplets, with the rest remaining in the continuous phase. The impact of these continuous phase proteins on the oxidative stability of protein-stabilized emulsions is not well understood. WPI-stabilized menhaden oil-in-water emulsions were prepared by high-pressure homogenization. In some experiments WPI was removed from the continuous phase of the emulsions through repeated centrifugation and resuspension of the emulsion droplets (washed emulsion). Unwashed emulsions were more oxidatively stable than washed emulsions at pH 7.0, suggesting that continuous phase proteins were antioxidative. The oxidative stability of emulsions containing different kinds of protein in the continuous phase decreased in the order SPI > CAS > WPI, as determined by both hydroperoxide and headspace propanal formation. Iron-binding studies showed that the chelating ability of the proteins decreased in the order CAS > SPI > WPI. The free sulfhydryls of both WPI and SPI were involved in their antioxidant activity. This research shows that continuous phase proteins could be an effective means of protecting omega-3 fatty acids from oxidative deterioration.     

Studies with myoglobin variants indicate that released hemin is the primary promoter of lipid oxidation in washed fish muscle

Variants of sperm whale myoglobin (Mb) were used to assess the mechanism of heme protein-mediated lipid oxidation in washed cod muscle. A myoglobin variant with high hemin affinity (V68T) was an exceptionally poor promoter of lipid oxidation, while a Mb variant with low hemin affinity (H97A) was a potent promoter of lipid oxidation. V68T releases hemin slowly due to the ability of threonine to hydrogen bond with coordinated water and the distal histidine within the heme crevice. H97A rapidly releases hemin because the relatively small alanine residue creates a channel for water to easily enter the heme crevice which weakens the covalent linkage of hemin to the proximal histidine. A variant sensitive to heme degradation (L29F/H64Q) was a weaker promoter of lipid oxidation compared to wild-type Mb. This suggests that degrading the heme ring and releasing iron decreased the ability of Mb to promote lipid oxidation. Free radicals resulting from hemin-mediated decomposition of lipid hydroperoxides have the capacity to propagate lipid oxidation and degrade hemin catalyst. This may explain why heme proteins behave as reactants rather than "catalysts" of lipid oxidation in washed cod. Collectively these studies strongly suggest that released hemin is the critical entity that drives heme protein-mediated lipid oxidation in washed fish muscle.     

Interactions of the sweet protein brazzein with the sweet taste receptor

Brazzein is a small, potently sweet protein. Homology modeling has been used to construct a model of the ligand-binding domain of the sweet taste receptor, and low-resolution docking has been used to identify potential modes of brazzein-receptor binding. Published brazzein mutation-taste data were then used to select one of these as the most likely brazzein-receptor binding orientation. This orientation places brazzein in contact primarily with the T1R2 subunit of the receptor, and it accounts for 21 of the 23 mutation results examined.     

Production and characterization of oil-in-water emulsions containing droplets stabilized by beta-lactoglobulin-pectin membranes

Oil-in-water emulsions containing droplets stabilized by beta-lactoglobulin (beta-Lg)-pectin membranes were produced using a two-stage process. A primary emulsion containing small droplets (d(32) approximately 0.3 microm) was prepared by homogenizing 10 wt % corn oil with 90 wt % aqueous solution (1 wt % beta-Lg, 5 mM imidazole/acetate buffer, pH 3.0) using a high-pressure valve homogenizer. The primary emulsion was then diluted with pectin solutions to produce secondary emulsions with a range of pectin concentrations (5 wt % corn oil, 0.45 wt % beta-Lg, 5 mM imidazole/acetate buffer, 0-0.22 wt % pectin, pH 3.0). The electrical charge on the droplets in the secondary emulsions decreased from +33 +/- 3 to -19 +/- 1 mV as the pectin concentration was increased from 0 to 0.22 wt %, which indicated that pectin adsorbed to the droplet surfaces. The mean particle diameter of the secondary emulsions was small (d(32) < 1 microm) at relatively low pectin concentrations (<0.04 wt %), but increased dramatically at higher pectin concentrations (e.g., d(32) approximately 13 microm at 0.1 wt % pectin), which was attributed to charge neutralization and bridging flocculation effects. Emulsions with relatively small mean particle diameters (d(32) approximately 1.2 microm at 0.1 wt % pectin) could be produced by disrupting flocs formed in secondary emulsions containing highly negatively charged droplets, for example, by sonication, blending, or homogenization. The particles in these emulsions probably consisted of small flocs containing a number of protein-coated droplets bound together by pectin molecules. These emulsions had good stability to further particle aggregation up to relatively high ionic strengths (< or =500 mM NaCl) and low pH (pH 3). The interfacial engineering technology used in this study could lead to the creation of food emulsions with improved physicochemical properties or stability.     

Interactions between bovine beta-lactoglobulin A and various bioactive peptides as studied by front-face fluorescence spectroscopy

Front-face fluorescence spectroscopy was used for the first time to study the interactions between bovine beta-lactoglobulin variant A (beta-Lg A) and various beta-Lg-derived bioactive peptides. Fluorescence spectra were recorded for beta-Lg A-peptide mixtures at 25 degrees C and pH 6.8 with an excitation wavelength of 290 nm to characterize the molecular environment of tryptophan (Trp) residues present in the protein but absent in the peptides. Spectra remained unchanged following addition of peptides beta-Lg f92-100 and beta-Lg f125-135, while Phe-Phe interaction between beta-Lg f69-83 molecules interfered with analysis. Addition of beta-Lg f102-105 produced a blue shift (3 nm) and a significant increase in fluorescence intensity, while addition of beta-Lg f142-148 also caused a significant increase in fluorescence intensity but accompanied by a red shift (3 nm). These results indicate that the polarity of the Trp environment in the beta-Lg A structure may be modified differently depending on the peptide added.     

Determination of 2-alkylcyclobutanones with electronic impact and chemical ionization gas chromatography/mass spectrometry (GC/MS) in irradiated foods

The use of a column containing 60 g of silica gel for cleanup and the use of isobutane as a reactant reagent for chemical ionization-mass spectrometric analysis of the saturated and monounsaturated alkyl side-chain 2-alkylcyclobutanones (2-ACBs; specifically induced by irradiation from fat in foods until the proof of contrary) has improved both the sensibility and the selectivity of the method when applied for the detection of irradiated foods. The quality of the chromatograms obtained was improved, allowing the detection of food samples (avocados) irradiated at low doses (0.1 kGy) or irradiated ingredients included in low proportions (less than 5%, wt/wt) in nonirradiated culinary foods. These analytical modifications for the detection of 2-ACBs on the official EN 1785 method enable an extension of its current field of application using common equipment of food quality control laboratories.     

Extraction, processing, and storage effects on curcuminoids and oleoresin yields from Curcuma longa L. grown in Jamaica

Aromatic diarylheptanoid compounds from Curcuma longa Linn grown in Jamaica were quantified by UV-vis spectrophotometry and high-performance liquid chromatographic (HPLC) analyses. The oleoresin yields from ethanolic extracts were quantified and evaluated with regard to the effects of the type of postharvesting process and the type of extraction method conducted on the plant material. Fresh samples that were hot solvent extracted provided the highest oleoresin yields of 15.7% +/- 0.4 ( n = 3), and the lowest oleoresin yields of 7.8% +/- 0.2 ( n = 3) were from the dried milled samples that were cold solvent extracted. Data from the ASTA spectrophotometer assay confirmed that dried samples contained the highest curcuminoid content of 55.5% +/- 2.2 ( n = 6) at the fifth month of storage, and the fresh samples showed a curcuminoid content of 47.1% +/- 6.4 ( n = 6) at the third month of storage. A modified HPLC analysis was used to quantify curcumin content. Data from the HPLC analysis confirmed that the dried treated, hot extracted, room temperature stored samples had the highest curcumin content of 24.3%. A novel high-performance thin layer chromatography (HPTLC) method provided a chemical fingerprint of the C. longa with the use of a commercial curcumin standard.     

Lipid oxidation in corn oil-in-water emulsions stabilized by casein,whey protein isolate,and soy protein isolate

Proteins can be used to produce cationic oil-in-water emulsion droplets at pH 3.0 that have high oxidative stability. This research investigated differences in the physical properties and oxidative stability of corn oil-in-water emulsions stabilized by casein, whey protein isolate (WPI), or soy protein isolate (SPI) at pH 3.0. Emulsions were prepared with 5% corn oil and 0.2-1.5% protein. Physically stable, monomodal emulsions were prepared with 1.5% casein, 1.0 or 1.5% SPI, and > or =0.5% WPI. The oxidative stability of the different protein-stabilized emulsions was in the order of casein > WPI > SPI as determined by monitoring both lipid hydroperoxide and headspace hexanal formation. The degree of positive charge on the protein-stabilized emulsion droplets was not the only factor involved in the inhibition of lipid oxidation because the charge of the emulsion droplets (WPI > casein > or = SPI) did not parallel oxidative stability. Other potential reasons for differences in oxidative stability of the protein-stabilized emulsions include differences in interfacial film thickness, protein chelating properties, and differences in free radical scavenging amino acids. This research shows that differences can be seen in the oxidative stability of protein-stabilized emulsions; however, further research is needed to determine the mechanisms for these differences.     

Inhibitory effects of resveratrol and pterostilbene on human colon cancer cells: a side-by-side comparison

The effects of resveratrol and pterostilbene (two structurally related stilbene compounds) on three human colon cancer cells were systematically compared. Cell viability tests indicated that IC(50) values of pterostilbene were 2-5-fold lower than those of resveratrol in all three cancer cells. Pterostilbene was also more potent in inhibiting colony formation of all three cancer cells. Annexin V/propidium iodide costaining assay and Western blotting analysis showed pterostilbene had a stronger apoptosis-inducing effect, which was evidenced by the higher percentage of annexin V positive cells and higher levels of cleaved caspase-3 and poly(ADP-ribose) polymerase proteins in cancer cells treated with pterostilbene compared with resveratrol. High-performance liquid chromatography analysis demonstrated that intracellular levels of pterostilbene were 2-4-fold higher than those of resveratrol after treatments with individual compounds at the same concentration. Overall, the results demonstrated that pterostilbene had more potent inhibitory effects on colon cancer cells than resveratrol, which may be associated with the superior bioavailability of pterostilbene to resveratrol.